Remodeling discussions and local services.
Swapping out old faucets and toilets - what brands actually last?
I get where you're coming from, but I’ve actually had the opposite experience with the brushed nickel in my own place. Maybe it’s the brand or just the water in my area, but I’ve found that if I stay on top of it - like, a quick wipe every couple days - the water spots don’t get too out of hand. I know that’s not always realistic, especially in a busy household, but it’s been manageable for me.
Matte black looks amazing, no question, but I’ve noticed it can start to look streaky if you use the wrong cleaner or even just hard water. And once you scratch that finish, there’s no going back. I had a client who used a slightly abrasive sponge on their matte black faucet and it never looked right again. Kind of a bummer.
Honestly, I think it comes down to how much maintenance you’re willing to do and how picky you are about little marks. Some people can’t stand any spots, others don’t even notice them. If you’ve got hard water, maybe try a polished chrome? It shows everything, but at least it’s easy to buff out and you don’t have to worry about damaging the finish as much.
Funny enough, I’ve seen some of the newer “spot-resistant” finishes from brands like Moen and Delta actually hold up pretty well. Not perfect, but definitely less hassle than older finishes. Still, nothing is truly maintenance-free... unless you go with something wild like unlacquered brass and just embrace the patina.
At the end of the day, I guess there’s always going to be some trade-off between looks and upkeep. I’d love to find that unicorn finish that hides everything and never needs cleaning, but until then, it’s all about picking your battles.
Still, nothing is truly maintenance-free... unless you go with something wild like unlacquered brass and just embrace the patina.
Ha, I tried the “embrace the patina” route once. My spouse called it “embrace the weird green spots.” Honestly, I’ve had better luck with stainless steel for faucets - less drama with water spots and scratches, especially if you’ve got kids who think everything is a drum. Chrome’s easy to clean, but man, every fingerprint shows up like a crime scene.
Stainless is definitely the MVP if you’ve got little percussionists at home. I’ve swapped out a ton of chrome faucets for families who were just tired of playing “spot the smudge.” For toilets, Toto’s been solid - haven’t had a callback yet. Moen and Delta are my go-tos for faucets. Anyone else notice Kohler’s finishes seem to scratch easier lately, or is it just me?
Swapping out old faucets and toilets - what brands actually last?
Anyone else notice Kohler’s finishes seem to scratch easier lately, or is it just me?
You’re not imagining it. I’ve had two recent projects where Kohler’s “vibrant” brushed nickel finish showed hairline scratches after just a few weeks. One client had a toddler who loves banging toy cars on everything, but even still, the wear seemed premature compared to what I’ve seen from Moen or Delta.
Stainless is definitely the way to go if you’ve got kids or, honestly, just a busy household. I swapped out a builder-grade chrome faucet in my own place for a Delta stainless model, and it’s been way less maintenance - no more chasing fingerprints every other day.
Toto toilets have been bulletproof for me too. I installed a Drake in a rental property five years ago, and it’s still going strong with zero issues. I do wish Moen would bring back some of their older cartridge designs, though. The new ones are fine, but I’ve had to replace a couple sooner than expected.
Funny how the “premium” brands sometimes don’t hold up as well as you’d think...
I’ve noticed the same thing with Kohler lately - used to be my go-to, but the last faucet I put in started showing scratches almost immediately. Not even rough use, just regular hand washing and cleaning. Kinda disappointing for the price.
Delta’s stainless finish has held up way better in my kitchen. I’ve got two teenagers who aren’t exactly gentle, and it still looks decent after a couple years. The only thing I’d say is their aerators can get a little gunky if you’ve got hard water, but that’s an easy fix.
On toilets, I’m with you on Toto. The Drake is a beast. I put one in my parents’ place and it’s survived everything from grandkids to holiday parties. American Standard’s Champion line has been solid for me too - maybe not as sleek, but reliable.
Funny how sometimes the “fancier” stuff just doesn’t last like the basics. I guess sometimes simple really is better.
I’ve had the same experience with Kohler lately - used to swear by them, but the finish just doesn’t seem as tough anymore. Have you ever tried Moen? I’ve put a few in rentals and they seem to take a beating without looking trashed. Curious if anyone’s had issues with their cartridges though…
I hear you on Kohler - the finish just doesn’t hold up like it used to. I’ve swapped in a lot of Moen lately, especially for clients who are rough on their fixtures. Haven’t had many cartridge issues myself, but I always keep a spare just in case. Honestly, for rentals, Moen’s been solid in my experience.
Honestly, for rentals, Moen’s been solid in my experience.
I’ve had a similar run with Moen in my own place - definitely feels like you get more bang for your buck. Here’s my quick checklist: I look for metal drain assemblies (not plastic), ceramic cartridges, and easy-to-find replacement parts. But I’m curious, has anyone tried Delta lately? I’ve seen some good deals, but not sure how they’re holding up after a few years of use.
I’m with you on Moen - haven’t had one fail on me yet, and swapping cartridges is a breeze. Delta’s stuff is decent, but I’ve noticed their finish can wear faster, especially on the cheaper lines. For rentals, I’d stick with Moen or even Kohler if the budget stretches.
Delta’s stuff is decent, but I’ve noticed their finish can wear faster, especially on the cheaper lines.
Yeah, I’ve seen that too - my Delta kitchen faucet started looking rough after just a couple years. Moen’s been solid for me, and the parts are easy to find if something does go wrong. Kohler’s nice but usually out of my price range unless there’s a sale. For toilets, I’ve had good luck with American Standard - affordable and no issues so far.
I’ve noticed the same thing with Delta - mine got those weird water spots that just wouldn’t buff out, and the finish dulled pretty fast. Moen’s been reliable here too, but I wish their designs were a bit less “safe.” For toilets, I’ve only tried American Standard and Toto so far. Has anyone dealt with Toto’s parts availability or repairs? I’m debating between those two for our main bathroom but not sure if one’s easier to maintain long-term.
Swapping out old faucets and toilets - what brands actually last?
For toilets, I’ve only tried American Standard and Toto so far. Has anyone dealt with Toto’s parts availability or repairs? I’m debating between those two for our main bathroom but not sure if one’s easier to maintain long-term.
I’ve been down this road more times than I care to admit, living in a house that’s seen more than a century of plumbing “innovation.” I’ll say this: American Standard is the workhorse, but Toto’s got the edge for actual performance. The catch is, when something breaks on a Toto, you’re not always popping down to the local hardware store for a quick fix. Some of their parts - especially the fancy fill valves or those unique flush mechanisms - can be a pain to track down unless you’ve got a good plumbing supply nearby or don’t mind waiting on shipping.
That said, in my experience, Toto toilets just don’t break as often. The one I put in our guest bath has been running smooth for almost a decade with nothing but a flapper swap. American Standard is easier when it comes to finding parts, but I’ve had to replace seals and handles more often than I’d like. It’s like they’re built for easy maintenance because you’ll be doing it more frequently.
On faucets, totally agree about Delta’s finish issues. I had one in the powder room that looked tired after just a couple years - water spots galore. Moen’s been better for me too, even if their designs are a bit... let’s say “predictable.” But honestly, I’ll take boring over having to replace something every few years.
If you’re thinking long-term and don’t want to fuss with repairs, Toto’s probably worth the slight hassle if you can stomach the occasional part hunt. For sheer convenience and availability of bits and pieces, American Standard is hard to beat. Just depends on whether you want to be fixing minor stuff every few years or hunting down a rare part once in a blue moon.
If you’ve got older plumbing or odd rough-ins (like I do), double-check rough-in measurements before pulling the trigger - Toto can be less forgiving there. Learned that one the hard way...
You’re not alone in overthinking this - honestly, I’ve had clients agonize over the same choice. I’ve seen Toto hold up beautifully in high-traffic homes, and the finish always looks sharp, but yeah, tracking down a weird part can be a headache. Still, I’d rather deal with that once every ten years than be swapping out handles or seals every other season. If you’re leaning Toto, trust your gut. Just double-check those measurements - Toto’s less forgiving if your plumbing’s quirky. Been there, done that... had to reorder a whole toilet once.
Toto’s reputation for durability is well-earned, and I get where you’re coming from on the parts issue - it can be a pain if you end up needing something out of the ordinary. That said, most folks never have to hunt down those oddball parts, especially if you stick with their more common models. I've noticed the build quality does seem to outlast some of the other brands I’ve tried over the years. You’re spot on about the measurements, though. I once had to return an entire unit because my rough-in was off by half an inch... not my proudest moment.
If you’re already leaning toward Toto, it probably means you’ve done your homework. I’ve found it’s better to invest in something solid upfront rather than deal with recurring leaks or wobbly handles every couple of years. And honestly, the finish on most Toto pieces holds up way better than some of the budget options - less pitting and discoloration over time. Just double-check that your existing setup matches what Toto requires and you’ll probably save yourself some hassle down the line.
I get what you mean about investing upfront - my last faucet was a “deal” and it started leaking after just two years. Still, I keep hearing mixed things about Toto’s flush power compared to Kohler.
That’s a big plus, but does anyone feel like the design options are a bit limited? I’m torn between playing it safe with durability or going for something that looks a little more unique. Has anyone found a brand that nails both?“the finish on most Toto pieces holds up way better than some of the budget options - less pitting and discoloration over time.”
That’s a big plus, but does anyone feel like the design options are a bit limited? I’m torn between playing it safe with durability or going for something that looks a little more unique.
I totally get the struggle - Toto’s finishes are solid, but yeah, their designs can feel a bit safe. I’ve actually had decent luck with Grohe for faucets. They’ve got some more modern looks and the build quality’s been solid in my experience. That said, I did have a Kohler toilet that outlasted everything else in my last house, so I’m not sure if it’s just luck of the draw sometimes. Has anyone tried Delta’s newer lines? Curious if they’re stepping up on both style and durability fronts.
Delta’s actually surprised me lately. I swapped in one of their Trinsic faucets last year, and it still looks brand new - no weird spots or leaks so far. The style’s definitely more interesting than some of the older lines, but I wouldn’t call it super bold. If you’re into something a bit different without going totally wild, it might hit the sweet spot. Durability seems solid, at least for now... but sometimes it really does feel like a bit of a gamble with plumbing stuff.
Swapping out fixtures has become kind of a routine for me with the number of rentals I have, and honestly, I’ve had mixed experiences with Delta. The Trinsic line does look sharp, I’ll give you that - had one in a condo reno last year, and it’s held up better than I expected. No leaks, no finish issues, and the tenants haven’t managed to break it yet, which is saying something.
But I’ve also had a couple of their older models where the cartridges started leaking after just a couple years... maybe they’ve stepped up their game recently? I do like how the newer stuff isn’t overly flashy but still feels modern.
For toilets, I’m still partial to Toto. Not the cheapest, but I swear those things are indestructible. I’ve got one in a 20-year-old duplex that’s never needed more than a flapper. Kohler’s been hit or miss for me - sometimes the parts are a pain to find, and I’ve had a couple poorly-seated tanks develop hairline cracks.
Honestly, I feel like a lot of it comes down to install. Even a good brand will give you headaches if it’s not put in right. I’ve had “budget” faucets last forever just because the plumber did a solid job, and I’ve had pricey ones fail when the install was rushed.
It does feel like a gamble sometimes, especially when you’re swapping stuff in and out for different properties. I try to stick with brands where I know I can get replacement parts easily, just in case. Nothing worse than hunting for some weird proprietary cartridge when you’ve got a tenant waiting.
Curious if anyone’s had luck with the newer Moen lines? I used to swear by them, but lately I’m not so sure...
- Totally agree on Toto - those things just keep going.
- Delta’s newer stuff does seem better, but I’ve had a couple weird issues with their finishes in high-use rentals.
- Moen’s recent lines feel lighter to me, almost like they’re using thinner materials? Haven’t had any major failures, but they don’t have that “solid” feel anymore.
- 100% on install quality making or breaking it. I’ve seen cheap faucets outlast expensive ones just because someone took their time with the plumbing.
- For parts, Delta and Moen are still the easiest for me to track down at local hardware stores. Kohler’s always a wild card... sometimes you’re waiting days for something simple.
I’ve noticed the same thing with Moen lately - used to feel way sturdier. Last year I swapped out a bunch of bathroom faucets in a client’s mid-century place and the new Moens just didn’t have that heft. Ended up going with Delta for the kitchen, mostly because I could actually find replacement parts without driving across town. Install quality really does make or break it though... had a “budget” faucet in my own rental that’s somehow outlasted everything else, just because the plumber took his time.