Notifications
Clear all

Ever locked out by your own smart door?

577 Posts
528 Users
0 Reactions
7,772 Views
Posts: 9
(@megan_runner)
Active Member
Joined:

I've actually run into weather-related issues with keypad locks a couple of times, especially during renovation projects in colder climates. Moisture can indeed seep into the keypad, causing buttons to stick or become unresponsive. Freezing temperatures sometimes drain batteries faster too, making the lock sluggish or completely dead. A simple fix I've found helpful is installing a small weather shield or cover above the keypad—keeps moisture out and extends battery life. Not foolproof, but definitely reduces headaches.


Reply
thomasy19
Posts: 14
(@thomasy19)
Active Member
Joined:

Totally agree, weather shields are lifesavers. Learned that the hard way when I got locked out after a snowstorm—standing there freezing, keypad totally iced over, and me trying to thaw it with my breath like some kind of DIY dragon. Another tip: lithium batteries handle cold way better than alkaline ones. Switched mine out and haven't had nearly as many sluggish-lock mornings since.


Reply
Posts: 10
(@lindareader)
Active Member
Joined:

Got locked out once during a heavy rainstorm—keypad was soaked and totally unresponsive. Ended up having to climb through a window (not my finest moment...). Definitely considering weather shields now, seems worth it.


Reply
jerry_wolf
Posts: 7
(@jerry_wolf)
Active Member
Joined:

Had a similar issue last winter—keypad froze solid, totally useless. Ended up installing a small weather shield and sealing edges with silicone. Took maybe 30 mins, tops, and haven't had trouble since... worth a shot if you're handy.


Reply
Posts: 18
(@magician898941)
Active Member
Joined:

Had a similar experience myself, though it wasn't winter-related. Mine happened during a heavy rainstorm—water seeped into the keypad and shorted it out completely. Ended up locked outside for nearly an hour until my neighbor came home with my spare key. After that fiasco, I took a similar approach to yours but went a step further: installed a weatherproof enclosure specifically designed for outdoor electronics. It was straightforward enough—just had to drill a couple of holes and mount it securely. Took about 45 minutes total, including sealing around the edges with silicone caulk.

Since then, no issues at all, even through some pretty intense storms. I'd definitely recommend anyone relying on smart locks or keypads outdoors to consider some kind of protective housing. It's a small investment of time and money compared to the hassle of being locked out in bad weather...


Reply
Page 30 / 116
Share:
Scroll to Top