Remodeling discussions and local services.

Making trim look pro without hiring out

151 replies
 

Join the conversation

Share your experience or ask a follow-up question.

cycling_michael

I hear you on the drying time - Floetrol’s a bit of a patience test, especially if you’re in a rush or the weather’s just not cooperating. I’ve had better luck using it in cooler months, honestly. One thing I started doing is lightly sanding between coats with a super fine grit, even with the Floetrol mixed in. It’s a little extra work, but it really helps get that pro look without piling on more product or risking drips. And yeah, thinning too much can be a pain... learned that the hard way on some baseboards that ended up looking almost translucent.


Reply
drummer73

Yeah, sanding between coats is a game changer, even if it’s a bit of a pain. I’ve tried skipping it to save time, but always end up regretting it. Floetrol’s great for leveling, but man, that wait... I’ve started using a cheap box fan to help things along. Not fancy, but it works. And thinning too much? Been there - my closet trim looked like it was painted with skim milk.


Reply

You’re not alone with the “skim milk” paint look - been there, too many times. Here’s the thing:

- Sanding between coats really is the secret sauce. It’s tedious, but it pays off, especially if you’re flipping or renting out and want that wow factor.
- Floetrol’s a solid move for leveling, but yeah, the dry time can drag. I’ve used a box fan as well - nothing fancy, just gets air moving and helps a bit.
- Thinning paint is tricky. I’ve ruined more than one door frame by getting impatient and adding too much water. Sometimes less is more.

Couple things I’ve picked up over the years:

- Don’t stress about perfection. Most buyers or tenants aren’t inspecting trim with a magnifying glass.
- If you mess up a coat, let it dry, sand it back, and go again. It’s annoying, but it’s fixable.
- Cheap brushes will make your life harder. Spend a few extra bucks on a decent angled sash brush - it makes cutting in way easier and leaves fewer streaks.

Honestly, you’re doing all the right stuff. It’s always tempting to cut corners to save time or money, but those little details add up in resale value or rental appeal. And hey, every project teaches you something new... even if it’s just how not to do it next time.


Reply
philosophy322

I hear you on the sanding - honestly, I used to skip it thinking it was overkill, but once I actually tried it, the difference was night and day. One thing I’ve wrestled with in my old place is whether to use oil-based or water-based paint for trim. The old woodwork seems to hold up better with oil, but the cleanup’s a pain and the smell lingers. Have you noticed a big difference in durability or finish between the two? I keep going back and forth on it.


Reply
runner553587

I totally get the back-and-forth. I’ve always felt like oil-based gives that super smooth, almost glassy finish, but man, the fumes linger for days. Water-based is so much easier to live with, but sometimes I feel like it chips faster - maybe that’s just me being rough on doors? Have you ever tried one of those hybrid alkyds? I’m curious if they’re actually a good compromise or just marketing.


Reply

Tried the hybrid alkyds on my last project - honestly, they’re not just marketing fluff. They lay down smoother than regular water-based, and cleanup’s still a breeze. The smell’s way less intense than oil, too, which is a win for my sinuses. Only thing is, you gotta watch your dry times; they can be a bit sneaky and tacky if you rush. I’d say they’re a solid middle ground, especially if you’re after that pro look without the full-on oil hassle.


Reply

I hear you on the hybrid alkyds - used them for my baseboards last month. They do level out nice, but I still find they show brush marks if you don’t baby them a bit. Maybe I’m just too impatient... but yeah, way less stinky than oil, which is a blessing when you’re painting after work and don’t want to gas out the whole house.


Reply
photo805355

I’ve run into the same thing with hybrid alkyds - if you rush, those brush marks definitely show up. I’ve found that using a really high-quality synthetic brush and keeping a wet edge helps, but it’s still not as forgiving as straight oil. On the plus side, I can actually sleep in the house after painting, which is a huge win. Sometimes I’ll even thin the paint just a touch to help it level out, but you have to be careful not to overdo it. It’s a balancing act for sure.


Reply

I totally get what you mean about the balancing act. When I did my first round of trim painting - honestly, I thought it’d be a breeze. I had this image in my head of perfectly smooth, glossy white trim, like something out of a magazine. Reality check: my first coat looked like a zebra crossed with a topographical map. The brush marks were wild.

I tried switching to those foam brushes thinking they’d be the answer... turns out, not so much. They left weird bubbles and streaks, and I ended up sanding more than I painted. In the end, what really helped was slowing way down and doing thinner coats than I thought made sense. Like, almost frustratingly thin. It took more layers but it leveled out way better.

I’ve also noticed the humidity in the room makes a difference - one time I painted on a rainy day and that stuff just sat there, refusing to dry or flatten out. Learned that lesson quick.

Funny thing is, even with all the fussing over technique and tools, there’s still always one spot where I’ll catch a rogue brush mark later on. At this point, I just call it “character.” But yeah, being able to sleep in the house without feeling like you’re huffing paint fumes is worth the trade-off for me too.

If anyone ever figures out how to get that perfect factory finish at home without losing their mind, let me know... until then, I’m embracing the imperfections.


Reply
gingerm70

Yeah, those foam brushes are a total trap. I fell for it too - thought I was being clever, then spent half a weekend sanding out weird craters. I’ve had the best luck with a decent angled sash brush and just accepting that “good enough” is sometimes as good as it gets. My trim’s got plenty of “character” at this point... but from five feet away, looks pro enough for me.


Reply

My trim’s got plenty of “character” at this point... but from five feet away, looks pro enough for me.

That’s honestly the best attitude. I used to obsess over every brush mark, but after a few projects, I realized that “good enough” is usually more than fine - especially once you’ve lived with it for a while. I do think the angled sash brush is a solid choice, especially if you’re using low-VOC paints (which tend to dry a bit faster and can show brush marks if you’re not careful).

One thing I’ve found helps is lightly dampening the brush before dipping it in paint. It seems to help the paint flow better and reduces drag, which means fewer streaks and less chance of those weird craters you mentioned from foam brushes. Also, I switched to recycled-content painter’s tape for the edges, and it’s saved me a ton of cleanup time - plus, less waste.

Curious if anyone here has tried those new plant-based paints? I’ve been experimenting with them on trim and doors. They’re a bit pricier, but I like knowing there’s less off-gassing. The finish is decent, but I’m still figuring out the best way to avoid lap marks since they dry pretty quick.

Has anyone had luck getting a really smooth finish without sanding between coats? I keep reading conflicting advice - some say always sand, others say just go slow and use thin coats. Would love to hear what’s actually worked for folks who care about both results and not trashing the environment in the process.


Reply

My trim’s got plenty of “character” at this point... but from five feet away, looks pro enough for me.

That’s the investor’s secret sauce right there - if it looks good from the open house distance, you’re golden. I used to stress about every nick and brush mark, but buyers (and renters) never notice. Your tip about dampening the brush is spot on. I’ll admit, I skip sanding between coats unless it’s a high-traffic rental where durability matters. Thin coats, decent brush, call it a day. “Character” adds value, right?


Reply
samwilson745

Character’s the whole reason I fell in love with my old place. I used to obsess over every little gap and uneven edge, but after a while, you just start seeing it as part of the story. My living room trim has a few dings from when we moved the couch in - no one’s ever noticed, or if they have, they’re too polite to say anything. I do agree about sanding if it’s a spot that gets knocked around a lot, but otherwise… I’d rather spend that time enjoying the house than fussing over perfection.


Reply

Honestly, I get where you’re coming from about “character” - I’ve got a few baseboards with stories of their own. Still, I think there’s a middle ground between perfection and just letting things go. You mentioned:

I’d rather spend that time enjoying the house than fussing over perfection.

Totally fair, but sometimes a quick fix can make a big difference without eating up your weekend. For example, if you’ve got gaps or uneven edges, a little caulk and a damp finger can work wonders. Doesn’t have to be a big production - just hit the spots that catch your eye most. I’ve found that even five minutes here and there adds up, and suddenly the whole room feels sharper.

And about those dings from moving furniture - wood filler and a touch-up with leftover paint or stain can make them vanish. Not saying every mark needs to go, but if something bugs you every time you walk by, it’s worth the ten minutes to patch it up. I guess I just like knowing I can enjoy the quirks without ignoring the stuff that actually bothers me.


Reply

I get the appeal of quick fixes - caulk and wood filler are definitely handy, and I’ve used my share. But I’ll admit, I’m a bit wary of patching over stuff without thinking about the materials. Some of those “easy” solutions can end up causing more trouble down the line, especially if you’re dealing with older wood or original trim. I once tried to fill a gap with a generic caulk, only to have it shrink and crack a few months later... ended up looking worse than before.

I’ve started leaning toward using natural fillers or even just sanding out rough spots, especially if the trim’s got some age. Sometimes a little beeswax polish does more for the look (and longevity) than paint ever could. Plus, I kind of like seeing the history in the wood - those dents and scratches tell a story. Not saying I leave everything as-is, but I’m pickier about what I “fix.” If it’s a safety thing or a real eyesore, sure, but otherwise, I’d rather let the quirks show. Maybe that’s just me being sentimental about old houses.


Reply
film982

Letting the quirks show is honestly underrated. I get what you mean about “easy” fixes sometimes making things worse - been there myself. Here’s what’s worked for me, especially when I’m trying to keep costs down:

- I used to slap caulk on every gap, but like you said, it shrinks or cracks and then you’re back at square one (or worse).
- Now, I’ll only patch if it’s a real problem spot. Otherwise, I just clean up the trim and maybe hit it with a bit of sandpaper.
- Beeswax or even a cheap homemade mix (olive oil + vinegar) can make old wood look way better without hiding its age.
-

“Sometimes a little beeswax polish does more for the look (and longevity) than paint ever could.”
Couldn’t agree more. Paint hides stuff, but polish brings out the character.

I do think there’s a balance - if something’s splintering or sharp, I’ll fix it. But those little dings? They’re part of the charm, and honestly, it saves money and time not chasing perfection.


Reply
gaming740

Letting the quirks show definitely has its place, but I do wonder if sometimes we lean a little too hard into “character” at the expense of finish. I get what you’re saying about caulk - cheap stuff is a nightmare, and even the good stuff can crack if the house shifts. But I’ve found that with the right prep (clean, dry, dust-free), and a high-quality paintable caulk, you can get those shadow lines to disappear for years. It’s not always about hiding flaws, but more about making the trim look intentional rather than neglected.

“Paint hides stuff, but polish brings out the character.”

That’s true to a point, but I’d argue it depends on the room and the light. In some spaces, especially with a lot of natural light, every ding and dent gets highlighted. Sometimes those “little dings” just end up looking like you ran out of steam halfway through. I’ve had clients who loved the idea of patina until they saw how uneven it looked in morning sun.

I’m also curious about using olive oil + vinegar on wood. It does bring out grain, but isn’t there a risk of it going rancid over time? I’ve seen some old baseboards get sticky or attract dust after DIY treatments like that. Beeswax is great - no argument there - but I’d be careful with food-based mixes unless you’re reapplying often.

I guess my take is: quirks are great when they look intentional. But if you want that “pro” look without hiring out, sometimes it’s worth spending an extra hour filling nail holes or running a bead of caulk where two pieces meet. It doesn’t have to be perfect - just consistent enough that it looks cared for rather than ignored.

Curious if anyone else has run into issues with homemade polishes long-term? Or maybe I’m just too picky...


Reply

I totally get where you’re coming from about quirks vs. finish. There’s a fine line between “character” and just looking half-done, especially when sunlight hits every imperfection. You nailed it with this:

“Sometimes those ‘little dings’ just end up looking like you ran out of steam halfway through.”

That’s been my experience too - what looks charming in the evening can look rough in daylight. I’ve definitely learned the hard way that a little extra time with caulk and wood filler pays off, even if it feels tedious in the moment.

On the olive oil + vinegar thing, I’ve seen mixed results. It does bring out grain, but I’ve had trim get tacky after a while, especially in humid rooms. Beeswax or even mineral oil seems more reliable long-term, at least for me.

You’re not being too picky - attention to detail is what separates “DIY” from “pro,” honestly. Consistency matters more than perfection. If you care enough to ask these questions, you’re probably already ahead of most folks doing it themselves.


Reply
lturner16

Nail on the head about “character” vs. just looking unfinished - there’s a difference between a charming old nick and a gap that catches every ray of sunlight. I’ve found that even with 100-year-old trim, a little extra sanding and a steady hand with the caulk gun makes all the difference. The oil-and-vinegar trick is hit or miss for me too; in my dining room, it just turned sticky and attracted dust. Shellac or a good paste wax has been way more predictable, especially if you want that subtle sheen without the mess. Consistency over perfection, every time... but I still obsess over those corners.


Reply
frodo_woof6875

Funny you mention the oil-and-vinegar thing - I tried that once on some baseboards in a rental, and the tenants called me a week later asking why their socks kept picking up grime. Lesson learned. I’ve had better luck with tinted wax, especially for blending in those little dings that just come with age. The trickiest part for me is always the inside corners; no matter how careful I am, there’s always a spot that looks a bit off in the afternoon sun. Guess that’s just part of the charm, right?


Reply
Scroll to Top