Remodeling discussions and local services.
Discussion options
How flat does a subfloor need to be for floating flooring?
A shallow dip seems like a different problem from a raised ridge, but both can leave a floating floor moving or stressing its joints. How do you check subfloor flatness with a straightedge, and what tells you the spot needs leveling rather than just being a minor variation?
I’m comparing floating laminate with engineered wood, but I know the installation method and allowable flatness can vary by specific flooring. Do the instructions usually give a clear limit for gaps beneath a straightedge? I’d rather follow that than assume a thicker underlay will make an uneven floor acceptable.
1 reply
The rocking check is useful for a ridge: set a long straightedge across it and see whether the ends lift or the straightedge rocks. Over a dip, look for the largest gap beneath the straightedge and measure it. Compare that measurement with the flatness limit in the instructions for the exact flooring product; if it’s over the limit, the spot needs correction.