Remodeling discussions and local services.
how much did your bathroom remodel run you (roughly)?
Lighting changes are always underrated - agree with you there. Honestly, most people don’t realize how much hidden stuff drives up the cost. I’ve seen “simple” makeovers balloon to $10k just because of old plumbing or rot. Keeping a bit of character is smart and saves money too.
I get the point about hidden costs, but honestly, I think keeping “character” can sometimes backfire. Here’s why:
- Old fixtures or tile might look cool, but they can hide leaks or mold. Fixing that later is way pricier.
- Swapping out all the plumbing at once (even if it feels like overkill) can save headaches down the road.
- I tried to save by keeping my old tub - ended up paying more when it cracked during demo.
Sometimes spending a bit more upfront actually saves money long-term... just my two cents.
Totally get where you’re coming from. I tried to “save” by keeping the original vanity in our last place - looked fine, but turned out there was some nasty water damage hiding underneath. Ended up costing more to fix that mess than just replacing it from the start. Sometimes those old features are just ticking time bombs. I still try to reuse stuff when it makes sense, but after a couple surprises, I’m way more cautious about what’s worth keeping.
Sometimes those old features are just ticking time bombs.
I get the worry, but I’ve actually had some luck keeping older stuff - especially if it’s solid wood. Not everything is a disaster waiting to happen. Sometimes a little TLC goes a long way and saves cash.
I totally get that - my place has these old cabinets that looked rough at first, but once I sanded them down and added new hardware, they actually turned out to be one of my favorite things in the bathroom. I was nervous about hidden issues too, but sometimes the older stuff is just built better. Not saying everything’s worth saving, but it’s kinda satisfying when you can keep a bit of the original character and not blow your budget.
Honestly, I think people underestimate how much you can get out of old cabinetry. I’ve worked on projects where the original cabinets - after a bit of elbow grease and swapping out the knobs - ended up being the highlight of the room. Not everything old is worth saving, sure, but the quality of older woodwork is tough to replicate on a tight budget. Sometimes it’s smarter to invest a little time in restoration rather than blowing cash on cheap new stuff that won’t last.
I totally get where you’re coming from about old cabinetry. When I started my bathroom remodel, I was convinced everything had to be gutted and replaced - new vanity, new shelves, the works. But once I started pricing out even the “budget” options, I realized how flimsy a lot of the new stuff is. Ended up sanding down the old vanity, painting it a deep green, and swapping out the hardware. It’s honestly my favorite part of the room now. The wood has this solid feel you just don’t get with particle board.
I spent maybe $200 on paint, knobs, and some sealant, compared to the $800+ I was quoted for a new vanity that felt like it would fall apart if you looked at it wrong. Not everything old is worth saving, but sometimes a little creativity goes way further than a big spend. Plus, there’s something satisfying about giving new life to what’s already there.
I get the appeal of keeping the old stuff, especially if it’s solid wood, but I’ve had the opposite experience in my last place. The vanity was original to the house - think 1970s laminate over particle board - and no amount of sanding or paint could hide the water damage and sagging shelves. Sometimes, starting fresh with a quality new piece is just less hassle in the long run, even if it costs more upfront. Guess it really depends on what you’re working with... not all “old” is created equal.
Not all “vintage” is worth saving, that’s for sure. I’ve run into those 70s vanities more times than I can count, and sometimes you really are just dealing with a lost cause. Particle board and water just don’t mix, and once it starts swelling or sagging, there’s no magic fix - just a lot of frustration and wasted time.
I get why people romanticize old fixtures, but honestly, if it’s not solid wood or something with real character, you’re often better off starting from scratch. I replaced one in my last flip with a mid-range all-wood model (think $400-ish), and the difference in both look and function was night and day. The upfront cost stings a bit, but when you factor in the time saved and the fact that you’re not fighting with drawers that barely open? Worth it.
There’s also something to be said for the peace of mind that comes with new materials - no hidden mold, no surprise rot, just a clean slate. I’m all for upcycling when it makes sense, but I’ve learned not to force it with stuff that’s past its prime. Sometimes you have to let go of the nostalgia and just do what’s practical.
Funny enough, I had a friend who tried to salvage an old vanity like that - spent weeks patching, sanding, sealing... and then it fell apart during install. He was so mad at himself for not just buying new in the first place. Lesson learned.
At the end of the day, your sanity and the final result are worth a little extra cash upfront. And yeah, not all “old” is created equal... sometimes it’s just old.
I totally get the frustration with particle board - once it’s gone, it’s gone. But I have to say, sometimes those old vanities can surprise you if you’re willing to put in a little creative elbow grease. I’ve salvaged a couple that looked hopeless at first glance, but after stripping off the laminate and reinforcing weak spots with hardwood trim, they ended up with way more personality than anything I could’ve bought new for under $500. Granted, it takes patience (and yeah, you have to pick your battles), but there’s something satisfying about giving new life to something everyone else wrote off.
That said, I do agree that not everything is worth saving - especially if mold or rot is involved. But if the bones are solid and you’re up for a project, sometimes those “lost causes” end up being the most unique part of the room. I guess it depends on whether you’re after convenience or character. For my last bathroom, I spent about $250 on an old dresser and another $100 in supplies turning it into a vanity... still going strong three years later.
I’m right there with you on the “pick your battles” thing. I tried to save our old vanity, but the particle board basically crumbled if I looked at it wrong. Ended up going the Craigslist dresser route too - cost me about $180 plus a weekend of swearing at plumbing. Still feels way sturdier than anything I could’ve bought new for the same price. Sometimes the hassle is worth it, sometimes not... guess I’ll know for sure in a few years.
I get the appeal of the Craigslist dresser hack - definitely a budget win and you end up with something unique. But honestly, I’ve had mixed luck with those. Sometimes the wood’s warped or the drawers never quite fit right after all the plumbing mods. I’ve started leaning toward splurging on a solid-wood vanity when I can find one, even if it means spending a bit more upfront. Less hassle, and I know it’ll hold up through a few flips. Still, I get the satisfaction of making something work for cheap... just not sure it always pays off in the long run.
I hear you on the Craigslist dresser thing - I've seen some real Frankenstein jobs over the years. Sometimes you score, sometimes you end up cursing at stuck drawers and weird gaps for weeks. Honestly, the solid-wood vanities are worth it if you can swing it. They take a beating and usually survive the next reno without much drama. Still, I get the thrill of making something cheap work... but man, when that MDF starts swelling from a leaky sink, it's just not fun.
I get the appeal of solid wood, but honestly, I’ve had good luck with some “Frankenstein” Craigslist finds - if you’re picky and willing to put in a bit of elbow grease. Here’s the thing: if you seal the inside of those drawers and joints with a decent water-based polyurethane, even MDF holds up longer than you’d think. Not forever, sure, but it buys you time and keeps stuff out of the landfill. Plus, you can always swap it out later if it starts to go south. Sometimes it’s more about how you prep and protect than what you start with.
Sometimes it’s more about how you prep and protect than what you start with.
Couldn’t agree more. I once flipped a duplex where the bathroom vanity was a Frankenstein mix of old dresser drawers and leftover MDF panels. Gave it a good sanding, sealed every inch, and honestly, it held up for years - looked way better than some of the “builder grade” stuff I’ve seen in new homes. It’s wild how much value you can squeeze out of something with a little creativity and elbow grease. Not everything has to be top-shelf to work, especially if you’re willing to put in the effort.
PREP WORK REALLY DOES MAKE THE DIFFERENCE
That’s a great example. I’m convinced half the “value” in a remodel comes from the prep and finish, not just the materials. I’ve seen folks spend a fortune on high-end vanities or tile, but skip the basics like proper sealing or leveling. Fast forward a couple years, and you’re dealing with warped wood or cracked grout lines. Meanwhile, a well-prepped piece of MDF or even a thrifted cabinet can last ages if you take the time to seal it up right and use the right hardware.
I’m all about squeezing every bit of value out of what you’ve got, especially with bathroom remodels where costs can spiral fast. My last one ran me just under $2,500, but that was mostly because I reused an old dresser for the vanity (lots of sanding and marine-grade poly), kept the existing tub, and did the tiling myself. I did splurge a bit on the faucet and shower fixtures, but honestly, I think the real “win” was just making sure every seam and edge was water-tight. I’d rather put in the hours up front than deal with mold or swelling down the line.
Curious - did you run into any issues with moisture over the years, or did the sealing hold up? I’ve always wondered how much of a difference it makes to use something like marine varnish versus regular polyurethane in a bathroom setting. Sometimes I worry I’m overthinking it, but then again, I’d rather overbuild than have to redo something in two years.
It’s funny how much of this stuff comes down to technique and patience, not just budget. You can throw money at a remodel, but if you skip the prep, it’ll show eventually.
I get the whole “prep is king” thing, but honestly, I think people sometimes go overboard with the sealing and fancy finishes. I used regular old polyurethane on my bathroom vanity (nothing marine-grade), and it’s been fine for five years. Maybe I just got lucky, or maybe my kids are less splashy than most, but I feel like as long as you’re not letting puddles sit for hours, you don’t always need to go full boat-builder mode. Sometimes the “overbuild” approach just eats up time and cash you could use elsewhere.
Title: How Much Did Your Bathroom Remodel Run You (Roughly)?
I hear you on the overkill with finishes. I’ve worked on projects where clients insisted on marine varnish for vanities, and honestly, unless you’re dealing with constant standing water or wild humidity, standard polyurethane does the trick for most households. In my own place, I used a mid-range poly on the vanity and it’s held up just fine - no peeling or weird discoloration after four years. I think the key is just making sure you don’t have leaks or let water sit forever. Sometimes simple really is enough, especially if you’re careful about daily use.
I’ve worked on projects where clients insisted on marine varnish for vanities, and honestly, unless you’re dealing with constant standing water or wild humidity, standard polyurethane does the trick for most households.
Couldn’t agree more - marine varnish is overkill in most residential settings. I’ve had a few flips where we just used a decent water-based poly and it held up through tenant turnover, which is saying something. The real issue I’ve seen is poor caulking or shoddy plumbing causing water to get behind the vanity. That’s where the real damage starts, not so much the finish itself. Curious if anyone’s actually had a poly fail just from regular use? For me, it’s always been about moisture control and ventilation more than the finish type.
Never actually had poly fail just from day-to-day use - if it’s applied right and you’ve got halfway decent ventilation, it’s pretty bulletproof. I’ve seen more vanities trashed by leaky supply lines or a bad bead of caulk than anything else. Honestly, people get hung up on the finish but ignore the basics like sealing up the backsplash or running a bead around the base.
One place I did cut corners once with an oil-based poly, thinking it’d be tougher, but it yellowed out way faster than I expected. Switched to water-based after that, no regrets. The only time I’d even consider marine varnish is if you’re in a crazy humid climate or have kids splashing water everywhere 24/7.
If you’re worried about longevity, focus on keeping water where it belongs, not on the vanity finish itself. That’s where I’ve always seen the real issues start.